Blade model
THE THIN STAIRCASE IS A TRUE DECO TREND!
IT REPRESENTS ELEGANCE AND LIGHTNESS AND PERFECTLY DRESSES YOUR INTERIOR.
MOREOVER, THIS STAIRCASE TAKES A LOT LESS SPACE, ALLOWING BETTER USE OF THE EMPTY SPACE UNDER THE STAIRS.
The Blade staircase is a kind of staircase hollowed out in a structural wall using brackets. For this reason, the technical condition for its realization is the existence of a brick wall at least 25 cm thick, consolidated with a concrete mixer crown embedded between the two ceiling slabs, or a reinforced concrete wall of 20 cm thickness. Stairs constructed in this way cannot exceed 100 cm in width. Of course, it is also possible to build a wider staircase, but in this case, its far end from the wall will be hung from the upper slab (with steel springs or strands) or the staircase will have to be supported by a side or bottom support fixed to the lower slab. One solution can be the installation of a safety glass wall, for example. You can also build the Blade staircase without a concrete wall with a suspension or a shoring system (see the photo U-shaped staircase - Blade opposite). For more information about this, please contact our specialist at the following email address: z.sz@escalierdesign.ch
Our Blade staircase can be covered with many materials and fitted with a balustrade.
If you opt for the Blade staircase, you must make sure that the balustrade is chosen in advance, even before beginning the construction works. This is because the fixing reinforcements must be installed in the vertical part of the concrete structure of the staircase, at a thickness of 3 cm when assembling it, before pouring the concrete into the plaster formwork. The balustrade can then be fixed at these locations by screwing it after the concrete has hardened.
Thanks to this method, the manufacturing and drying time is halved compared to the traditional concrete stairs.
And to top it all, our staircase becomes passable 72 hours at the latest after it is poured.
OUR COMPANY PROVIDES A 5 YEAR WARRANTY ON STAIRS BUILT BY OUR SPECIALISTS.
SPIRAL STAIRCASE - BLADE 
STRAIGHT STAIRS - BLADE 
U-SHAPED STAIRS - BLADE
Stairs of all shapes can be made using fast-setting concrete technology (new congealed concrete method).
BLADE staircase prices:
The following classic staircase prices are valid for a level difference of 250-300 cm and a width of 90 cm. The costs of evaluation, design, material and labor costs are included in the quoted prices. The prices indicated are without VAT and the demolition costs of the old staircase are not included.
Our classic fast-setting concrete staircases are delivered in a raw condition. Thus, the prices indicated on our website do not include finishing work because they are specific to each. For any finish, whatever it is, you must request a second quote from EscalierDesign 888 Sàrl or a third-party company of your choice.
